USB 2.0 connection to DAW (up to 480Mbps)
44.1 to 96KHz sample rates, 24-bit resolution
4 Analog 1/4" and XLR combi-jack inputs on the rear panel for mic/line inputs
Record up to 6 sources at once
2 Analog 1/4" TRS (Stereo Main) outputs
dbx high-voltage, ultra-low noise mic preamp's on all analog mic/line inputs (4 total)
2 Hi-Z instrument inputs
Supports Windows and Mac platforms
48V phantom power for each input pair
Input signal metering via 8 LED's per channel
Signal mixing and stereo bus signal metering
2 1/4" high-output
headphone connections
MIDI In/Out
S/PDIF I/O
Zero-latency monitoring
Low-latency ASIO drivers
Lexicon Pantheon II VST/AU reverb plug-in
Software suite includes Steinberg's Cubase LE4, and Toontrack
EZdrummer Lite
Specification
Microphone Inputs: Female XLR Pin 2 Hot
Input Impedance: 3k balanced
Phantom Power: +48 Volts
Maximum gain: +55dB
E.I.N. (at max gain): 127dB @ 55dB gain typical (150 source), 130dB @ 55dB gain typical A-weighted (150 source)
Maximum Input Level: +8dBu
Frequency Response: +/ 1.5dB, 20Hz-20kHz
THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, -6dBu
Line Inputs: 1/4" TRS balanced or unbalanced
Input Impedance: 20k balanced, 13k unbalanced
Maximum Input Level: +18dBu
Frequency Response: +/ 1.5dB, 20Hz-20kHz
THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, +18 dBu
Instrument Input: 1/4" TS unbalanced
Input Impedance: 1M
Maximum Input Level: +10dBu
Frequency Response: +/ 2.5 dB, 20Hz-20kHz
THD+N: <0.08%, 1kHz, +4dBu
Line Outputs: 1/4" TRS balanced or unbalanced
Level: +18dBu maximum
Impedance: 32 Balanced, 16 Unbalanced
Headphone Output: 1/4" stereo jack 250mW per channel at 50
MIDI Interface: 5-pin DIN connectors for MIDI in and MIDI out
Sample Rate: 44.1, 48, 88.2, or 96kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 108dB typical, A-weighted, 20HZ-20kHz
D/A (24 Bit) 110dB typical, A-weighted, 20Hz-20kHz
A/D/A (24 Bit) 106dB typical, A-weighted, 20Hz-20kHz
Power requirements: Power adaptors for 100 240 VAC, 50/60Hz, 15W